Eddy Wireless SD Cards Series Guía de usuario descargar pdf (Pagina 27)

Chapter4. Integration

Chapter 4. Integration

This chapter explains how you can make Eddy to communicate. It deals with LAN and pin header connection guides

for Eddy to operate together with the target serial device.

Follow these steps to connect Eddy to the device and network.

4.1 Connection Guide

1) WAN/LAN

In order to connect Eddy to network, you need to use RJ45 Ethernet port. It supports both 10Mbps and 100Mbps

Ethernet connection (auto-sensing). Since Eddy’s LAN port supports MDIX function, you can either connect cross

LAN cable or direct LAN cable. Plug one end of a LAN cable to Eddy and the other end to a hub, switch, or any

other network device that can provide you with network access.

2) DB9

For the model included a DB9 serial port, you can simply connect Eddy to the destination serial device with a DB9

cable. For pin specifications, please refer to Chapter 3.

3) MCI slot

MMC and SDCards excepting T-Flash, Micro SD, and SDHC can be used through MCI slot. It provides Maximum 2

GBytes. Please note that MCI and SDCard must be inserted before power is induced to Eddy module.

2) USB Host

An USB memory stick or USB hub can be attached to Eddy-S2M/PIN module’s USB host port. For an USB Hub it

should have own power.

4.2 First-time Bootup

First of all, please make sure the power input you supply to the module is corresponding with the Eddy model that

you have. If an appropriate power input has been successfully supplied, Eddy will power on and start booting.

Although there is no power LED to check the status, you can check by LEDs on the RJ45 Ethernet port. LED status

operation is described in Chapter 3. Hardware Description.

An IP address is required to access Eddy’s web interface or telnet command-line configuration tool. By factory

default, Eddy is assigned a static IP address. After the initial connection, you can either manually assign a different IP

address or set Eddy to automatically get an IP address from a DHCP server. While this depends on your network

environment and policy, it is strongly recommended that you assign Eddy with a unique static IP.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 62 63

Sin comentarios

Eddy Wireless SD Cards Series Guía de usuario Pagina 27